User`s guide
Agilent PXT Wireless Communications Test Set
User’s Guide
122
MNC
This value is carried in SIB1 and in the Attach Accept message. Setting this menu key overwrites this
value in both messages.
This setting overwrites the value defined in the currently loaded scenario file, when the
BSE emulator is not running (Mode > BSE > Emulator Mode- Stop is selected).
Mode
BSE
Overwrites Scenario File Value
Yes
Preset
01
Initial S/W Revision
6.3
Key Path
BSE > Mode Setup> More > NAS Settings
2 or 3 Digit MNC
Controls the number of digits of MNC. This setting overwrites both locations: SIB1 and Attach Accept.
This setting overwrites the value defined in the currently loaded scenario file, when the
BSE emulator is not running (Mode > BSE > Emulator Mode- Stop is selected).
Mode
BSE
Overwrites Scenario File Value
Yes
Range
2,3
Preset
2
Initial S/W Revision
6.3
Key Path
BSE > Mode Setup> More > NAS Settings
NAS Ciphering Algorithm
NAS Ciphering Algorithm controls the Ciphering Algorithm selected for use in the Non Access Stratum.
This is signaled in the EMM layer’s Security Mode Command. EEA0 may be used with any integrity
algorithm – but if EEA1 or EEA2 is used, the selected ciphering algorithm must match the integrity
algorithm being used in the EMM layer’s Security Mode Command contained in the scenario file.
Mode
BSE, FDD
Overwrites Scenario File Value
Yes
Range
EEAO | EEA1| EEA2
Preset
EEAO
Initial S/W Revision
6.4
Key Path
BSE > Mode Setup> More > NAS Settings