User`s guide

Agilent PXT Wireless Communications Test Set
User’s Guide
120
AS Ciphering Algorithm
This controls the ciphering algorithm that is used in the RRC Security Mode Command that is sent to the
UE.
Note that although EEA0 can be used with any integrity algorithm, if EEA1 is selected, EIA1 must be
configured in the RRC Security Mode Command in the scenario file for use as the integrity algorithm.
Similarly, if EEA2 is selected, EIA2 must be configured in the RRC Security Mode Command in the scenario
file.
Mode
BSE, FDD
Overwrites Scenario File Value
Yes
Range
EEAO| EEA1| EEA2
Preset
EEAO
Initial S/W Revision
6.4
Key Path
BSE > Mode Setup> More > RRC Settings > More > More > SMC
SR Config Index
Sets the scheduling request configuration index in the RRC Connection Setup message and in the
Re-establishment message.
Mode
BSE
Overwrites Scenario File Value
Yes
Range
0 to 157
Preset
0
Initial S/W Revision
6.5
Key Path
BSE > Mode Setup> More > RRC Settings > More > More
NAS Settings
Enables you to access the Non-Access Stratum (NAS) parameter settings that are available to you.
The NAS contains all the functions and protocols used directly between the UE and the core network. The
main NAS specification is 3GPP TS 24.301. The NAS protocols are transparent to the access network.
These protocols manage the mobility of the UE and the activation, modification, and deactivation of user-
plane channels for transferring user data between the UE and the IP network.
Key Path: BSE > Mode Setup> More
PTI Handling
Procedure Transaction Identity (PTI)
Auto: Utilizes “intelligent caching” of the PTI received in the UL messages and auto-populates this PTI
value into the EPS Session Management (ESM) messages sent on the DL.
Manual: Disables Auto function and enables you to manually set the value of the PTI for the ESM
messages sent on the DL.