User`s guide

Agilent PXT Wireless Communications Test Set
User’s Guide
115
onDurationTimer
Enables you change the setting of the on duration timer that is present in the RRC Connection
Reconfiguration message of the currently loaded scenario file.
Mode
BSE
Overwrites Scenario File Value
Yes
Range psf1 | psf2 | psf3 | psf4 | psf5 | psf6 | psf8 | psf10 | psf20 | psf30
| psf40 | psf50 | psf60 | psf80 | psf100 | psf200
Preset
psf6
Dependencies and/or Couplings
Connected DRx On/Off must be set to On.
Initial S/W Revision
6.3
Key Path
BSE > Mode Setup> More > RRC Settings > More
drx-InactivityTime
Specifies the number of PDCCH-subframe(s) after successfully decoding a PDCCH that the UE will listen to
the PDCCH before turning off its receiver.
Specifies the number of consecutive PDCCH-subframe(s) after successfully decoding a PDCCH indicating
an initial UL or DL user data transmission for this UE.
For example, a value of psf5 corresponds to 5 PDCCH sub-frames.
Mode
BSE
Overwrites Scenario File Value
Yes
Range
Psf1 to psf2560
Preset
Psf1920
Dependencies and/or Couplings
Connected DRx On/Off must be set to On.
Initial S/W Revision
6.3
Key Path
BSE > Mode Setup> More > RRC Settings > More
drx-retransmission timer
Mode
BSE
Overwrites Scenario File Value
Range
Preset
psf2
Dependencies and/or Couplings
Connected DRx On/Off must be set to On.
Initial S/W Revision
6.4
Key Path
BSE > Mode Setup> More > RRC Settings > More