User`s guide

Agilent PXT Wireless Communications Test Set
User’s Guide
113
Default Paging Cycle
Controls how frequently UE can be paged. This setting is contained in SIB2.
This setting overwrites the value defined in the currently loaded scenario file, when the
BSE emulator is not running (Mode > BSE > Emulator Mode = Stop
is selected).
Mode
BSE
Overwrites Scenario File Value
Yes
Range
Rf32 | Rf64 | Rf128 | Rf256
Preset
Rf32
Initial S/W Revision
6.3
Key Path
BSE > Mode Setup> More > RRC Settings
NB
Controls how frequently UE can be paged. This setting is contained in SIB2.
This setting overwrites the value defined in the currently loaded scenario file, when the
BSE emulator is not running (Mode > BSE > Emulator Mode = Stop
is selected).
Mode
BSE
Overwrites Scenario File Value
Yes
Range fourT | twoT | oneT | halfT | quarterT | oneEighthT | oneSixteenthT
| oneThirtySecondT
Preset
oneT
Initial S/W Revision
6.3
Key Path
BSE > Mode Setup> More > RRC Settings
RRC Settings - Key Menu 2
Accesses the menu that enables you to configure the following Discontinuous Reception (DRx) settings.
All the settings in this key menu overwrite the comparable values defined in the
currently loaded scenario file, when the BSE emulator is not running (Mode > BSE >
Emulator Mode = Stop is selected).