User`s guide

Agilent PXT Wireless Communications Test Set
User’s Guide
111
Preset
1
Initial S/W Revision 6.3
TM7 for TDD was added in software release 6.5.
Key Path
BSE > Mode Setup> More > RRC Settings
Transmission Mode
Controls the transmission mode assigned in the RRC Connection Setup message. If set to TM3 or TM4,
this menu key also enables the codebook subset restriction field.
The Implicit setting enables the UE to derive the transmission mode based on the number of Tx Antennas
setting (the parameter is not signaled inside the RRC Connection Setup message in this case). If the No of
Tx Antennas is set to 1, the UE assumes TM1 is being used. If it is set to 2, the UE assumes TM2 is being
used.
This setting overwrites the value defined in the currently loaded scenario file, when the
BSE emulator is not running (Mode > BSE > Emulator Mode = Stop is selected).
Mode
BSE
Overwrites Scenario File Value
Yes
Range TM1 | TM2 | TM3 | TM4 | TM6 |Implicit
TM7 (TDD only)
Preset
TM1
Initial S/W Revision 6.3
Added TM6 for FDD only in 6.4.
Added TM6 for TDD and TM7 for TDD only in 6.5.)
Key Path
BSE > Mode Setup> More > RRC Settings
p-Max On/Off
The p-Max value is carried in SIB1 and determines the maximum power that the UE is allowed to transmit.
This setting controls whether the IE is present or not.
This setting overwrites the value defined in the currently loaded scenario file, when the
BSE emulator is not running (Mode > BSE > Emulator Mode = Stop
is selected).
Mode
BSE
Overwrites Scenario File Value
Yes
Range
On|Off
Preset
Off
Initial S/W Revision
6.3
Key Path
BSE > Mode Setup> More > RRC Settings