User`s guide

Agilent PXT Wireless Communications Test Set
User’s Guide
109
RB Size
Sets the number of contiguously allocated localized virtual resource blocks used on the downlink where a
semi-persistent scheduling allocation is being used.
This parameter is referenced as
CRBs
L
in 3GPP 36.213, section 7.1.6.3.
The number of resource blocks allocated is constrained by the bandwidth of the cell.
This parameter is only available when using transmission modes one and two (which use Resource
Allocation Type 2).
Mode
BSE, FDD
Range 1-6 (1.4 MHz Bandwidth)
1-15 (3 MHz Bandwidth)
1-25 (5 MHz Bandwidth)
1-50 (10 MHz Bandwidth)
1-75 (15 MHz Bandwidth)
1-100 (20 MHz Bandwidth)
Preset
3
Initial S/W Revision
6.4
Key Path Mode > BSE > Mode Setup > More > PHY Settings > DL Resource
Allocation > SPS Config
RB Start
Sets the starting resource block used for the downlink allocation where a semi-persistent scheduling
allocation is being used.
This parameter is referenced as
START
RB
in 3GPP 36.213, section 7.1.6.3.
This field is only available when using transmission modes one and two (which use Resource Allocation
Type 2).
Mode
BSE, FDD
Range 0 – 5 (1.4 MHz Bandwidth)
0 – 14 (3 MHz Bandwidth)
0 – 24 (5 MHz Bandwidth)
0 – 49 (10 MHz Bandwidth)
0 – 74 (15 MHz Bandwidth)
0 – 99 (20 MHz Bandwidth)
Preset
0
Initial S/W Revision
6.4
Key Path Mode > BSE > Mode Setup > More > PHY Settings > DL Resource
Allocation > SPS Config