User`s guide

Agilent PXT Wireless Communications Test Set
User’s Guide
106
SI/RA/P-RNTI
Enables you to set the aggregation level or number of Control Channel Elements (CCEs) occupied by the
following DCI broadcast message types:
SI: System Information
RA: Random Access Response
P-RNTI: Paging Radio Network Temporary Identity
Select the aggregation level by referencing the tables above as they are dependent upon the channel
bandwidth for the DL Resource Allocation.
Mode
BSE
Range
4, 8
Preset ACELL = 4
BCELL = no preset
State Saved
No
Initial S/W Revision
6.1
Key Path Mode > BSE > Mode Setup > More > PHY Settings > DL Resource
Allocation > More > Aggregation Level
TM1 Resource Allocation Type
Enables the selection of the resource allocation type that must be used for DL allocations in Transmission
Mode 1. The different types of allocations are described in 3GPP TS 36.213 s7.1.6. By default, Type 2
Localized Allocations are used and DCI 1A messages assign the DL resource. Selecting Type 0/1 here
means that DCI 1 messages will assign the DL resource. Currently, only Type 0 allocations are supported.
Mode
BSE, FDD
Range
Type0/1, Type2
Preset
Type2
Dependencies and/or Couplings
This function is only available in TM1.
Initial S/W Revision
6.3
Key Path Mode > BSE > Mode Setup > More > PHY Settings > DL Resource
Allocation > More
RCT
Accesses the menu of DL Resource Allocation parameters used in performing Radio Conformance Testing.
Key Path: Mode > BSE > Mode Setup > More > PHY Settings > DL Resource Allocation > More