User`s guide

Agilent PXT Wireless Communications Test Set
User’s Guide
100
RB Size
Sets the number of contiguously allocated localized virtual resource blocks used on the downlink.
This parameter is referenced as
CRBs
L
in 3GPP 36.213, section 7.1.6.3.
The number of resource blocks allocated is constrained by the bandwidth of the cell.
This parameter is only available when using transmission modes one and two (which use Resource
Allocation Type 2).
Mode
BSE
Range 1-6 (1.4 MHz Bandwidth)
1-15 (3 MHz Bandwidth)
1-25 (5 MHz Bandwidth)
1-50 (10 MHz Bandwidth)
1-75 (15 MHz Bandwidth)
1-100 (20 MHz Bandwidth)
Preset
50 (10 MHz Bandwidth)
Dependencies and/or Couplings
Only available in TM1 and TM2
Initial S/W Revision
6.0
Key Path Mode > BSE > Mode Setup > More > PHY Settings > DL Resource
Allocation
RB Start
Sets the starting resource block used for the downlink allocation.
This parameter is referenced as
START
RB
in 3GPP 36.213, section 7.1.6.3.
This field is only available when using transmission modes one and two (which use Resource Allocation
Type 2).
Mode
BSE
Range 0 5 (1.4 MHz Bandwidth)
0 14 (3 MHz Bandwidth)
0 24 (5 MHz Bandwidth)
0 49 (10 MHz Bandwidth)
0 74 (15 MHz Bandwidth)
0 99 (20 MHz Bandwidth)
Preset
0
Dependencies and/or Couplings Only available in TM1 and TM2
Grayed out when Mode Setup > More > PHY Settings >
DL Resource Allocation > CQI Reports > Random Subband
Selection is set to On.
Random Subband Selection
Initial S/W Revision
6.0
Key Path Mode > BSE > Mode Setup > More > PHY Settings > DL Resource
Allocation