User`s guide

Agilent PXT Wireless Communications Test Set
User’s Guide
99
I_MCS(Subframe #1-9)
If I_MCS sf-control is set to On, this value specifies the MCS Index that is used on the downlink in
subframes one through nine.
Mode
BSE, FDD
Range
1 to 9
Preset
5
Dependencies and/or Couplings
I_M CS sf-control must be set to On to enable this function.
Initial S/W Revision
6.0 (Moved to DL Resource Allocation menu in 6.4)
Key Path Mode > BSE > Mode Setup > More > PHY Settings > DL Resource
Allocation > I_MCS sf-control
I_MCS
(Index Modulation Coding Scheme)
Sets the MCS Index used by the UE for downlink transmissions.
This parameter is referenced as
MCS
I
in 3GPP 36.213, section 7.1.7.
The selected MCS Index determines the modulation order and transport block size used for the
transmission (see 3GPP 36.213 sections 7.1.7.1 and 7.1.7.2.1).
Mode
BSE
Range
0 – 28
Preset
5
Dependencies and/or Couplings
MCS Based on CQI must be set to Off to enable this function.
Initial S/W Revision
6.0
Key Path Mode > BSE > Mode Setup > More > PHY Settings > DL Resource
Allocation