User`s guide

Agilent PXT Wireless Communications Test Set
User’s Guide
96
Subframe #5 Control
Subframe #0 Control
Key Path: Mode > BSE > Mode Setup > More > PHY Settings
Resource Allocation Mode
Auto: This is a dynamic mode of operation where the values of RB Size, RB Start, and I_MCS are selected
by the settings on the instrument. The decision to make a DL transmission is determined by the presence
of data from higher protocol layers (for example: IP or RRC) that is pending transmission.
Fixed MAC Padding: This replaces the data on the DL with transport blocks comprised entirely of padding
data which is then discarded by the UE at its MAC layer. This Fixed MAC Padding option is used during
statistical throughput to provide a reference measurement channel with the correct contents.
Mode
BSE
Range
Auto | Fixed MAC Padding
Preset
Acell/ Bcell = Auto
Initial S/W Revision
6.0
Notes
This is a requirement stated in 36.521-1 , V 9.1.0 in PUCCH and is a
procedure for generating the pattern.
Key Path Mode > BSE > Mode Setup > More > PHY Settings > DL Resource
Allocation
CQI Reports
Accesses the following functions:
MCS Based on CQI
Enables the MCS Index used on the downlink, to be determined by the latest wideband CQI report sent by
the UE on the uplink.
You must load a scenario file that has configured the UE to send wideband CQI
reports.
Mode
BSE
Range
On | Off
Preset
Off
State Saved
No
Initial S/W Revision 6.1
Enabled this function for TDD in 6.5.
Key Path Mode > BSE > Mode Setup > More > PHY Settings > DL Resource
Allocation > CQI Reports