User`s guide

Agilent PXT Wireless Communications Test Set
User’s Guide
95
Aperiodic CQI
The settings in this menu control the starting and stopping of aperiodic CQI reports and the frequency for
which they are generated. You must use a scenario file that has the CQI report configuration set
appropriately to aperiodic for the UE to report them.
Mode
BSE
Preset
01
Initial S/W Revision
6.3
Key Path Mode > BSE > Mode Setup> More > PHY Settings > UL Resource
Allocation > RCT
CQI Request
Starts or stops the sending of UE report requests by the PXT.
Mode
BSE
Range
On, Off
Preset
Off
Initial S/W Revision 6.3
Enabled this function for TDD in 6.5.
Key Path Mode > BSE > Mode Setup> More > PHY Settings > UL Resource
Allocation > RCT > Aperiodic CQI
Report Frequency
Indicates the frequency at which the PXT requests aperiodic reports by setting the interval (in subframes)
between the two UE aperiodic CQI reports. For example: with Report Frequency set to 1, the PXT requests
a report every subframe.
Mode
BSE
Range FDD: 1 – 10
TDD: 10, 20, 30, 40, 50
Preset
1
Initial S/W Revision 6.3
Enabled this function for TDD in 6.5.
Key Path Mode > BSE > Mode Setup> More > PHY Settings > UL Resource
Allocation > RCT> Aperiodic CQI
DL Resource Allocation - Key Menu 1
Accesses the 1st menu of configurable Downlink Resource Allocation parameters.
Resource Allocation Mode
CQI Reports
I_MCS
RB Size
RB Start
Type0 Bitmap