User`s guide

Agilent PXT Wireless Communications Test Set
User’s Guide
93
In the uplink, the semi-persistent grant scheme is implicitly cancelled if no data is sent for a network
configured number of empty uplink transmission opportunities (see 3GPP TS 36.321, chapter 5.10).
For the PXT, LCID 10 must be used as the logical channel identifier for semi-
persistent scheduling.
Mode
BSE, FDD
Initial S/W Revision
6.4
Key Path Mode > BSE > Mode Setup > More > PHY Settings > UL Resource
Allocation
I_MCS
Enables you to specify the modulation and coding scheme index where a semi-persistent scheduling
allocation is being used.
Mode
BSE, FDD
Range
0 to 23
Preset
7
Initial S/W Revision
6.4
Key Path Mode > BSE > Mode Setup > More > PHY Settings > UL Resource
Allocation > SPS Config
RB Size
Sets the number of contiguously allocated resource blocks used on the uplink, where a semi-persistent
scheduling allocation is being used.
This parameter is referenced as
CRBs
L
in 3GPP 36.213, section 8.1.
The number of resource blocks allocated is constrained by the bandwidth of the cell.
Mode
BSE, FDD
Range 1-6 (1.4 MHz Bandwidth)
1-15 (3 MHz Bandwidth)
1-25 (5 MHz Bandwidth)
1-50 (10 MHz Bandwidth)
1-75 (15 MHz Bandwidth)
1-100 (20 MHz Bandwidth)
Preset
3
Initial S/W Revision
6.4
Key Path Mode > BSE > Mode Setup > More > PHY Settings > UL Resource
Allocation > SPS Config