User`s guide

Agilent PXT Wireless Communications Test Set
User’s Guide
92
Ignore PRACHs
Setting this parameter to On, enables the BSE to ignore UL PRACH preambles from the UE.
Mode
BSE, FDD
Range
On | Off
Preset
Acell / Bcell = Off
Initial S/W Revision
6.1
Key Path Mode > BSE > Mode Setup > More > PHY Settings > UL Resource
Allocation
Aggregation Level
Accesses the menu that enables you to set the PDCCH C-RNTI Aggregation Level for the UL.
Aggregation level sets the number of CCEs occupied by the various DCI messages, to enable more efficient
transmission of control information.
Mode
BSE, FDD
Initial S/W Revision
6.1
Key Path Mode > BSE > Mode Setup > More > PHY Settings > UL Resource
Allocation
C-RNTI
(Cell Radio Network Temporary Identity)
Sets the number of Control Channel Elements (CCEs) occupied by DCI messages for the UL.
Mode
BSE, FDD
Range
1 | 2 | 4 | 8
Preset ACELL = 2
BCELL = 4
State Saved
No
Initial S/W Revision
6.1
Key Path Mode > BSE > Mode Setup > More > PHY Settings > UL Resource
Allocation > Aggregation Level
SPS Config
(Semi-persistent Scheduling Configuration)
Accesses the menu keys to configure semi-persistent scheduling for the uplink.
Because voice calls (VoLTE) send short bursts of data at regular intervals, compared to bursty, infrequent
and bandwidth consuming data transmissions of web surfing, video streaming, and emailing, it is more
efficient to define a transmission pattern which is known as semi-persistent scheduling. The following
parameters determine essential elements of defining this transmission pattern which significantly reduces
the scheduling assignment overhead.