User`s guide
Agilent PXT Wireless Communications Test Set
User’s Guide
91
Mode
BSE
Range FDD: 0 to 23, 29
TDD: 0 to 23
Preset
ACELL / BCELL = 12
Initial S/W Revision
6.1
Notes
This key changed at S/W Revision 6.3.
Key Path Mode > BSE > Mode Setup > More > PHY Settings > UL Resource
Allocation
RB Size
Sets the number of contiguously allocated resource blocks used on the uplink.
This parameter is referenced as
CRBs
L
in 3GPP 36.213, section 8.1.
The number of resource blocks allocated is constrained by the bandwidth of the cell.
Mode
BSE
Range 1-6 (1.4 MHz Bandwidth)
1-15 (3 MHz Bandwidth)
1-25 (5 MHz Bandwidth)
1-50 (10 MHz Bandwidth)
1-75 (15 MHz Bandwidth)
1-100 (20 MHz Bandwidth)
Preset
ACELL / BCELL = 30 (10 MHz)
Initial S/W Revision
6.1
Key Path Mode > BSE > Mode Setup > More > PHY Settings > UL Resource
Allocation
RB Start
Sets the starting resource block used for the uplink allocation.
This parameter is referenced as
START
RB
in 3GPP 36.213, section 8.1.
Mode
BSE
Range 0 – 5 (1.4 MHz Bandwidth)
0 – 14 (3 MHz Bandwidth)
0 – 24 (5 MHz Bandwidth)
0 – 49 (10 MHz Bandwidth)
0 – 74 (15 MHz Bandwidth)
0 – 99 (20 MHz Bandwidth)
Preset
ACELL / BCELL = 0
Initial S/W Revision
6.1
Key Path Mode > BSE > Mode Setup > More > PHY Settings > UL Resource
Allocation