User`s guide

74 E6651A User’s Guide
5 Signal Generator Mode
Signal Generator Mode
SG Mode Setup Procedure
To provide a standard Mobile WiMAX signal to a Device
Under Test (DUT):
Connect the E6651A with the
Device Under Test (DUT)
After applying AC power to the Test Set and initializing the
program, connect the DUT to the Test Set using either an RF
cable or antenna.
Select SG Mode In the initial Measurement Window, select the Signal Generator
menu item. The Test Set is not transmitting a signal at this
point. Figure 43 shows the initial display window for SG
mode.
Figure 43 Signal Generator Window
The menu items available in SG mode are:
File Index Use to select one of the signal files in the Waveform File List.
Detailed information for the selected signal is displayed in
the Waveform File Information area. Adjust the File Index
value using the Knob or Numeric Keys.
Load File Select this to continuously transmit the selected signal. To
cease signal transmission, press the MOD and RF Front Panel
buttons to turn off Modulation and RF output.
Test Mode Select SG when using Signal Generator mode.