User`s guide

Signal Analyzer Mode 4
E6651A User’s Guide 63
Measurement Menu
Following completion of the subscriber station's network
entrance procedure, the Uplink Padding test can be
performed. The Uplink signal analysis function is provided
when the Uplink Padding Test is in progress.
Uplink Measurement Menu
In SA mode, press Measure on the Front Panel to display the
menu shown in Figure 36. This mode is used to measure
and analyze the quality of uplink signals transmitted by a
Mobile WiMAX subscriber station or repeater. This section
lists the options available in the Uplink Measurement Menu.
Figure 36 SA Mode Uplink Measurement Window
Spectrum Use to display the Spectrum Measurement Window.
“Spectrum Measurement Window" on page 66 describes this
window in detail.
Modulation Use to display the Mobile WiMAX Modulation Accuracy
Analysis Window. “Mobile WiMAX Modulation Accuracy
Analysis Window" on page 64 describes this window in
detail.
Flatness Use this button to display the Mobile WiMAX Flatness
Analysis Window. “Flatness Analysis" on page 71 describes
this window in detail.