User`s guide

58 E6651A User’s Guide
4 Signal Analyzer Mode
Measurement Preparation
SA Mode Setup Procedure
1 Connect the Test Set With the Device Under Test
(DUT): After applying AC power to the E6651A and
initializing the program, connect the DUT to the Test Set
using either an RF cable or antenna.
2 Select SA Mode: In the initial Measurement Window, select
the menu item. The DUT is now
transmitting a signal. Figure 31 shows the Initial
Measurement Screen for SA mode.
Figure 31 Initial Measurement Screen for SA Mode
System Settings
Press System to display the Mode Setup (System) Menu. This menu
includes options for Mobile WiMAX, Machine ID, Test Mode, Clock
Source, Connect E6655A, Trigger, Update.
Signal Analyzer