User`s guide

54 E6651A User’s Guide
3 Base Station Emulator Mode
Timing Offset Use the Knob or Numeric Keys to adjust the timing offset of
the uplink signal.
UL MAP Offset MCS scheme in uplink direction is applied after the number
of frames specified in UL MAP Offset.
Setting Test Parameters
It is possible to adjust the settings for various parameters
used in the Uplink and Downlink Test modes. Press the
Parameter Settings button in the BSE Mode Selection menu
to display available parameters as shown in Figure 29 and
Figure 30. Select the parameters to be modified and adjust
the parameter value.
Figure 29 Adjustable Parameters (Screen 1 of 2)