User`s guide

34 E6651A User’s Guide
3 Base Station Emulator Mode
Entry procedure must be invoked from the SS using a
Network Entry Application. Obtain this application from
the SS vendor. A Network Entry Application is typically
applied from a PC, PDA, or from the SS itself.
After successfully establishing two way communications,
various control messages between the E6651A and the SS
are displayed in the Action Window, as shown in Figure 12.
If only DCD and UCD messages are present in the window,
two way communications have not been established.
Figure 12 Establishing Two Way Communications Between the E6651A
and the SS