User`s guide

26 E6651A User’s Guide
2 Getting Started
Basic Operation
Turning the Power ON
1 Connect the AC power cable: Insert the AC power cable
into the power inlet on the rear panel of the Test Set.
2 Turn on the Power Switch: Turn on the Power Switch
above the AC power inlet.
3 Power the Unit On: With the system in stand- by, press
the Power button on the Front Panel. The Power LED
turns green, indicating that the Test Set is in Power On
State. The E6651A Test Set program starts automatically.
4 Program Start- Up: Figure 3- 6 depicts the start- up screen
displayed while the Test Set measurement application
loads. Please be aware that this process may take several
minutes.
Figure 8 E6651A Test Set Program Start-Up Screen