User`s guide
Appendix A - Network Entry Procedure A
E6651A User’s Guide 185
Profile Selection
The Profiles are displayed in 2 lists, the File List and the
Memory List. The Memory List shows the profiles loaded in
FPGA Memory. To be used, a profile must be loaded into
FPGA memory.
The required profile can be selected for use as follows:
1 Press System > More > to display the
Profile Manager screen as shown in Figure 52.
2 Press and use the knob, arrow or numeric
entry keys to highlight the required profile in the Memory
List.
3 Press to test the SS using the selected
profile.
Figure 52 Certification Profile Selection window
4 If the required profile is not in the Memory List press
and highlight a Profile Type in the File List.
5 Press and use the knob, arrow or numeric
entry keys to highlight a free Bank in the Memory List.
6 Press to upload the selected profile into
FPGA memory. The profile name is displayed in the Bank
list.
7 Highlight and activate the profile for use as described in
steps 2 and 3.
Profile Manager
Memory List
Activate Profile
File LIst
Memory List
Upload Profile