User`s guide

184 E6651A User’s Guide
A Appendix A - Network Entry Procedure
Repetition Setting The E6651A can repeat UL MAP and DL MAP information in
downlink frames. The repetition control function is provided
as shown in Figure 50 on page 183. And the DL/UL user
data repetition function is provided also as shown in
Figure 51.
Figure 51 BSE Setting function - B
Bandwidth Request Mode
Setting
The E6651A provides two bandwidth allocation algorithms to
allocate uplink data region for SS's data transmission. They
are BW- REQ and UGS. The BW- REQ algorithm allocates
uplink data region based on bandwidth request from SS. The
UGS algorithm allocates uplink data region amount to "UL
BW Size" . You can select between the two algorithms as
shown in Figure 51.
n
Symbol Number Allocated number of symbols between uplink and downlink
can be adjusted in the E6651A as shown in Figure 51. You
can adjust uplink and downlink symbol ratio.