User`s guide

Appendix A - Network Entry Procedure A
E6651A User’s Guide 183
• Ranging Matching Rate (RM): The ratio of valid Periodic
Ranging attempts to total ranging attempts
• Ranging Power (RP): The power information for the
Periodic Ranging Code
REP-REQ message Setting
The E6651A Test Set can control the transmission of
REP- REQ message. The message is sent from BS to SS and
is used to get the SS's status information by the BS. Two
control parameters are provided.
• REP- REQ msg. Enable/Disable Setting
• REP- REQ msg. Transmission rate control : determines
time interval between subsequent messages.
Figure 50 BSE Setting function - A
Full Occupied Setting The E6651A provides the function to fill unallocated
sub- channels and symbols of downlink frame with arbitrary
data to support mobile WiMAX RCT test function. The "Full
Occupied" setting is a toggle function.
•On: fill unallocated data region of downlink frame with
arbitrary data bits.
•Off: don't fill unallocated data region of downlink frame.