User`s guide

110 E6651A User’s Guide
6 Remote Interface (API) Programming Command Reference
E6651_GetUIQNegQuaterAvgPower
Declaration int E6651_GetUIQNegQuaterAvgPower(BYTE MID,
double * Value);
Parameter
MID [in]: E6651’s equipment number to be controlled
remotely.
Value [out]: Average power of sub- carriers (sub- carrier
interval: - Nused/2 to - Nused/4) when
E6651(MID) is operating in Uplink Flatness
Measure Mode.
Return Value
Success: STATE_SUCCESS(1)
Failure: STATE_ERROR(- 1)
Description Retrieve Average power within sub- carrier interval of
-Nused/2 to -Nused/4 when E6651(MID) is operating in
Uplink Flatness Measure Mode.
E6651_GetUIQPosQuaterAvgPower
Declaration int E6651_GetUIQPosQuaterAvgPower(BYTE MID,
double * Value);
Parameter
MID [in]: E6651’s equipment number to be controlled
remotely.
Value [out]: Average power of sub- carriers (sub- carrier
interval: +Nused/2 to +Nused /4) when
E6651(MID) is operating in Uplink Flatness
Measure Mode.
Return Value
Success: STATE_SUCCESS(1)
Failure: STATE_ERROR(- 1)
Description Retrieve Average power within sub- carrier interval of
+Nused/2 to +Nused/4 when E6651(MID) is operating in
Uplink Flatness Measure Mode.