User`s guide

106 E6651A User’s Guide
6 Remote Interface (API) Programming Command Reference
E6651_GetUIQCHPower
Declaration int E6651_GetUIQCHPower(BYTE Mouldable * Value);
Parameter
MID [in]: E6651’s equipment number to be controlled
remotely.
Value [out]: Channel power value when E6651 is
operating in Spectrum Analyzer mode and
Uplink measurement mode is in progress.
Return Value
Success: STATE_SUCCESS(1)
Failure: STATE_ERROR(- 1)
Description Retrieve Channel power value of E6651(MID) when E6651 is
operating in Uplink measurement mode.
E6651_GetUIQEVM
Declaration int E6651_GetUIQEVM(BYTE MID, double * Value);
Parameter
MID [in]: E6651’s equipment number to be controlled
remotely.
Value [out]: EVM value when E6651 is operating in
Spectrum Analyzer mode and Uplink
measurement mode is in progress. (dB)
Return Value
Success: STATE_SUCCESS(1)
Failure: STATE_ERROR(- 1)
Description Retrieve EVM value of E6651(MID) when E6651 is operating
in Uplink measurement mode.
E6651_GetUIQFreqOffset
Declaration int E6651_GetUIQFreqOffset(BYTE MID, double *
Value);
Parameter
MID [in]: E6651’s equipment number to be controlled
remotely.
Value [out]: designated Frequency Offset value of E6651
when SA is operating in Uplink Measure
Mode.
Return Value
Success: STATE_SUCCESS(1)
Failure: STATE_ERROR(- 1)
Description Retrieve designated Frequency Offset value when
E6651(MID) is operating in Spectrum Analyzer mode.