Technical data

74 Getting Started Guide
3 Test Set Operating System
USB Connections
The controller front panel provides two USB 3.0 ports and four USB 2.0 ports to which
you can connect USB mass storage devices and accessories such as printers and
keyboards. The test set USB Host support includes the standard Microsoft Windows
USB class drivers for human interface, mass storage, printing, scanning, and imaging
devices. A complete up-to-date list of the Windows USB class driver support is available
on the Microsoft website.
http://www.microsoft.com/whdc/system/bus/usb/USBFAQ_intro.mspx
The test set USB device driver included in the test set software supports the test and
measurement industry standard USBTMC-USB488 device class.
In addition, the Agilent IO Libraries CD that was included with your test set contains
USB Host drivers that allow control of other test sets connected to the USB bus.
Agilent Technologies does not support or warrant correct test set operation if additional
USB drivers from third parties are installed in the test set. It is possible that additional
drivers could break the normal USB operation. If USB operation is broken, recovery
would require reinstalling the test set application using the hard drive recovery process.