Technical data

42 Getting Started Guide
2 Front and Rear Panel Features
4 LAN Connectors Two TCP/IP Interface connectors that are used for remote test set operation.
Choose the LAN 1 port to have an IP address assigned to the test set dynamically,
using DHCP. If your local network does not support DHCP, choose the LAN 2 port
to use a private static IP address. For more information, see “LAN Address
Configuration" on page 30.
5 USB 3.0 The controller provides two USB 3.0 ports.
6 USB 2.0 The controller provides four USB 2.0 ports.
# Item Name Description