Technical data

28 Getting Started Guide
1 Quick-Start
Separate Input and Output Port Setup (RFIO 1 and RFIO 2)
Although Ports RFIO 1 and RFIO 2 are designed to operate as full-duplex ports, they can
function as separate inputs and outputs.
To use the RFIO 1 port as the input and the RFIO 2 port as the output, set up the RF
Input using this menu setting or its equivalent command:
Input/Output > RF Input > RF Input Port > RFIO 1
Command:
:FEED:RF:PORT RFIO1
Then set up the RF Output using this menu setting or its equivalent command:
Input/Output > More > RF Output & Test Set Config > RF Output Port > RFIO 2
Command:
:FEED:RF:PORT:OUTP RFIO2