Technical data

Chapter 5 61
Mode Parameters
Mode and Measurement Parameters
Mode Parameters
[:SENSe]:LSEQuencer:TDSCdma:TDEMod:MODScheme:AUTO 1|0|ON|OFF
[:SENSe]:LSEQuencer:TDSCdma:TDEMod:MODScheme:AUTO?
TD-SCDMA Demod – Scramble Code
Scramble Code setting for TD-SCDMA mode. The available range is 0 ~ 127. For more details about the
command see the TD-SCDMA online help (or in pdf format, the User’s and Programmer’s Reference).
[:SENSe]:LSEQuencer:TDSCdma:TDEMod:SCODe <integer>
[:SENSe]:LSEQuencer:TDSCdma:TDEMod:SCODe?
TDSCDMA Demod – Channel Configuration
The following set of commands allows you to specify the parameters for the channel. They are
unavailable when “Code Channel Detection” and “Mod Scheme” are both AUTO.
• Select Code Length
• Select All Code Channels
• Select Code Channel
• Code Channel Status
• Midamble Shift
• Modulation Format
• Phase Shift
• Phase Shift Detection
TD-SCDMA Select Code Length
Select Code Length in Channel Configuration setting for TD-SCDMA mode. The available selections
include 1, 2, 4, 8 and 16. For more details about the command see the TD-SCDMA online help (or in pdf
format, the User’s and Programmer’s Reference).
[:SENSe]:LSEQuencer:TDSCdma:TDEMod:SCLength <integer>
[:SENSe]:LSEQuencer:TDSCdma:TDEMod:SCLength?
TD-SCDMA Select All Code Channels
Select All Code Channels in Channel Configuration setting for TD-SCDMA mode. If the Select All
Code Channels is ON, by modifying the modulation format or the midamble shift, the user can change
the values of all code channels which have the same code length and at the same time, the Select Code
Channel key will be unavailable. For more details about the command see the TD-SCDMA online help
(or in pdf format, the User’s and Programmer’s Reference).
[:SENSe]:LSEQuencer:TDSCdma:TDEMod:CDCHannel:SALL 1|0|ON|OFF
[:SENSe]:LSEQuencer:TDSCdma:TDEMod:CDCHannel:SALL?