Technical data

Chapter 5 55
Mode Parameters
Mode and Measurement Parameters
Mode Parameters
GSM Timeslot
Time Slot setting for GSM mode. Provides an On/Off for each timeslot (0 to 7). Generally used only with
periodic and ext frame triggers. For more details about the command see the GSM/EDGE online help (or
in pdf format, the User’s and Programmer’s Reference).
[:SENSe]:LSEQuencer:EDGE:CHANnel:SLOT <integer>
[:SENSe]:LSEQuencer:EDGE:CHANnel:SLOT?
[:SENSe]:LSEQuencer:EDGE:CHANnel:SLOT:AUTO OFF|ON|0|1
[:SENSe]:LSEQuencer:EDGE:CHANnel:SLOT:AUTO?
GSM Burst Type
Burst Type setting for GSM mode. Specifies the burst type that the test set searches for, and to which it
synchronizes. For more details about the command see the GSM/EDGE online help (or in pdf format, the
User’s and Programmer’s Reference).
Choices:
•Sync (SCH)
• Access (RACH)
• Normal - NB (TCH and CCH)
• Higher Symbol Rate - HB (TCH and CCH); requires EDGE Evolution U9071A-3FP to be installed
• Mixed (NB/HB for TSC sync); requires EDGE Evolution U9071A-3FP to be installed
[:SENSe]:LSEQuencer:EDGE:CHANnel:BURSt NORMalSYNC|ACCess|HSRate|MIXed
[:SENSe]:LSEQuencer:EDGE:CHANnel:BURSt?
GSM TSC
TSC setting for GSM mode. Allows you to select the Training Sequence Code that determines which
burst is to be measured. Applicable only when the selected GSM measurement requires a burst sync of
type "Training Sequence". For more details about the command see the GSM/EDGE online help (or in
pdf format, the User’s and Programmer’s Reference).
[:SENSe]:LSEQuencer:EDGE:CHANnel:TSCode <integer>
[:SENSe]:LSEQuencer:EDGE:CHANnel:TSCode?
GSM Mod Scheme
Modulation scheme setting for GSM mode. Selects the Modulation Scheme (modulation type) for
Normal Burst that the test set searches for when Auto mode is selected. For more details about the
command see the GSM/EDGE online help (or in pdf format, the User’s and Programmer’s Reference).
[:SENSe]:LSEQuencer:EDGE:SYNC:NORMal:MODulation:AUTO ON|OFF|1|0
[:SENSe]:LSEQuencer:EDGE:SYNC:NORMal:MODulation:AUTO?