Technical data

Chapter 3 39
Source List Sequencer Parameter Definitions
Source Parameters
Source List Sequencer Parameter
Definitions
4: Radio Band
This parameter specifies a radio band to be used. The choices are outlined below (listed beside the radio
standards to which they apply).
The key path for selecting Radio Band from the front panel menus is:
[Source], List Sequencer, List Sequencer Setup, Radio Setup, Radio Standard, <select band>
5: Radio Band Link
This parameter specifies the link direction for the present step within the source sequence.The link
direction is used in conjunction with the Radio Band and Channel parameters to determine the output
frequency. \When set to “UP”, the source will calculate the uplink frequency according to an uplink
formula together with selected radio band and channel number. When set to “DOWN”, the source will
calculate the downlink frequency according to a downlink formula together with selected channel band
and channel number.
The key path for selecting Radio Band Link from the front panel menus is:
[Source], List Sequencer, List Sequencer Setup, Radio Setup, Link
Table 3-1. Values for Radio Band Parameter
Radio Standard Radio
Band
NONE NONE
GSM
or:
EDGE
PGSM, EGSM, RGSM, DCS1800, PCS1900, GSM450,
GSM480, GSM850, GSM700, TGSM810
WCDMA BANDI, BANDII, BANDIII, BANDIV, BANDV, BANDVI,
BANDVII, BANDVIII, BANDIX, BANDIX, BANDX,
BANDXI, BANDXII, BANDXIII, BANDXIV
C2K (cdma2000)
or
C1X (1xEV-DO)
USCELL, USPCS, JAPAN, KOREAN, NMT, IMT2K, UPPER,
SECOND, PAMR400, PAMR800, IMTEXT, PCS1DOT9G,
AWS, US2DOT5G, PUBLIC, LOWER
LTE (LTE-FDD) NONE, BAND1, BAND2, BAND3, BAND4, BAND5,
BAND6, BAND7, BAND8, BAND10, BAND11, BAND12,
BAND13, BAND14, BAND17, BAND18, BAND19,
BAND20, BAND21, BAND24, BAND25, BAND26,
BAND27, BAND28, BAND31
LTE-TDD BAND33, BAND34, BAND35, BAND36, BAND37,
BAND38, BAND39, BAND40, BAND41, BAND42,
BAND43, BAND44
TD-SCDMA BANDA, BANDB, BANDC, BANDD, BANDE, BANDF