Technical data

298 Chapter 19

TD-SCDMA Programming Commands

Power vs. Time (PvT)

TD-SCDMA Programming Commands

Power vs. Time (PvT)

This section provides the remote control SCPI commands for the TD-SCDMA Power vs. Time (PvT)

measurement from within the List Sequencer. This measurement is available only if you have the

TD-SCDMA measurement application licensed on the test set.

For more detailed information about the PvT measurement, refer to the online help associated with the

TD-SCDMA measurement application, which is also available in PDF format (“User’s and

Programmer’s Reference”) on the Agilent website, www.agilent.com/find/e6640a.

You can also refer to the measurement guide for the X-series TD-SCDMA measurement application,

which is available on the Agilent website, www.agilent.com/find/mxa.

Power vs. Time (PvT) measurement SCPI commands

There is a set of SCPI commands available to program the TD-SCDMA PvT measurement when it is

used in the TD-SCDMA mode. To set up the TD-SCDMA measurements from within the Sequence

Analyzer mode you need to prefix the SCPI commands with LSEQuencer:TDSCdma. For example, the

[:SENSe]:PVTime part of the TD-SCDMA PvT SCPI commands are replaced with

[:SENSe]:LSEQuencer:TDSCdma:PVTime.

The following commands are used to set up the TD-SCDMA PvT measurement.

[:SENSe]:LSEQuencer:TDSCdma:PVTime:SWEep:TIME <integer>

[:SENSe]:LSEQuencer:TDSCdma:PVTime:SWEep:TIME?

[:SENSe]:LSEQuencer:TDSCdma:PVTime:MASK:SELect CUSTom|STANdard

[:SENSe]:LSEQuencer:TDSCdma:PVTime:MASK:SELect?

[:SENSe]:LSEQuencer:TDSCdma:PVTime:MASK:LIST:LOWer:ABSolute <ampl>,

[:SENSe]:LSEQuencer:TDSCdma:PVTime:MASK:LIST:LOWer:ABSolute?

[:SENSe]:LSEQuencer:TDSCdma:PVTime:MASK:LIST:LOWer:POINts?

[:SENSe]:LSEQuencer:TDSCdma:PVTime:MASK:LIST:LOWer:RELative <ampl>,

[:SENSe]:LSEQuencer:TDSCdma:PVTime:MASK:LIST:LOWer:RELative?

[:SENSe]:LSEQuencer:TDSCdma:PVTime:MASK:LIST:LOWer:TIME <time>, <time>,

[:SENSe]:LSEQuencer:TDSCdma:PVTime:MASK:LIST:LOWer:TIME?

[:SENSe]:LSEQuencer:TDSCdma:PVTime:MASK:LIST:UPPer:ABSolute <ampl>,

[:SENSe]:LSEQuencer:TDSCdma:PVTime:MASK:LIST:UPPer:ABSolute?

[:SENSe]:LSEQuencer:TDSCdma:PVTime:MASK:LIST:UPPer:POINts?

[:SENSe]:LSEQuencer:TDSCdma:PVTime:MASK:LIST:UPPer:RELative <ampl>,