Technical data

Chapter 18 285
LTE-TDD Programming Commands
Modulation Accuracy (Rho)
LTE-TDD Programming Commands
Modulation Accuracy (Rho)
This section provides the remote control SCPI commands for the LTE-TDD Modulation Accuracy (Rho)
measurement from within the List Sequencer. This measurement is available only if you have the
LTE-TDD measurement application licensed on the test set.
For more detailed information about the Modulation Accuracy measurement, refer to the online help
associated with the LTE-TDD measurement application, which is also available in PDF format (“User’s
and Programmer’s Reference”) on the Agilent website, www.agilent.com/find/e6640a.
You can also refer to the measurement guide for the X-series LTE-TDD measurement application, which
is available on the Agilent website, www.agilent.com/find/mxa.
Modulation Accuracy measurement SCPI commands
There is a set of SCPI commands available to program the LTE-TDD Modulation Accuracy
measurement when it is used in the LTE-TDD mode. To set up the LTE-TDD measurements from within
the Sequence Analyzer mode you need to prefix the SCPI commands with LSEQuencer:LTETdd. For
example, the [:SENSe]:RHO part of the modulation accuracy SCPI commands are replaced with:
[:SENSe]:LSEQuencer:LTETdd:RHO
The following commands are used to set up the modulation accuracy measurement.
[:SENSe]:LSEQuencer:LTETdd:CEVM:EETTime
[:SENSe]:LSEQuencer:LTETdd:CEVM:EQUalizer:TRAining
[:SENSe]:LSEQuencer:LTETdd:CEVM:EQUalizer:TRAining:MAFiLTer
[:SENSe]:LSEQuencer:LTETdd:CEVM:EQUalizer:TRAining:MAFilter:LENGth
[:SENSe]:LSEQuencer:LTETdd:CEVM:EQUalizer:TRAining:MCFNormalize
[:SENSe]:LSEQuencer:LTETdd:CEVM:EQUalizer:TRAining:MODE
[:SENSe]:LSEQuencer:LTETdd:CEVM:EVMMinimize
[:SENSe]:LSEQuencer:LTETdd:CEVM:EVMMinimize:AMPLitude
[:SENSe]:LSEQuencer:LTETdd:CEVM:EVMMinimize:FREQuency
[:SENSe]:LSEQuencer:LTETdd:CEVM:EVMMinimize:IQOFfset
[:SENSe]:LSEQuencer:LTETdd:CEVM:EVMMinimize:TIMing
[:SENSe]:LSEQuencer:LTETdd:CEVM:EXTended:FREQuency:LOCK:RANGe
[:SENSe]:LSEQuencer:LTETdd:CEVM:FREQuency:SYNThesis[:STATe]
[:SENSe]:LSEQuencer:LTETdd:CEVM:MCFilter:STATe
[:SENSe]:LSEQuencer:LTETdd:CEVM:POWer:BOOSt:NORMalize
[:SENSe]:LSEQuencer:LTETdd:CEVM:PROFile:AUTO[:DETect]
[:SENSe]:LSEQuencer:LTETdd:CEVM:PROFile:NALLocation