Technical data

24 Chapter 2
Analyzer List Sequencer Parameter Definitions
Acquisition Parameters
Analyzer List Sequencer Parameter
Definitions
The key path for selecting the Radio Standard from the front panel menus is:
[Meas Setup], Acquisition Setup, Radio Setup, Radio Standard
NOTE A particular radio standard will be available here only if the application for the associated
measurement mode (GSM, for example) is currently loaded.
3: Radio Band
This parameter specifies a radio band appropriate to the radio standard specified in the previous
parameter. The choices are outlined below.
The key path for selecting the Radio Band from the front panel menus is:
[Meas Setup], Acquisition Setup, Radio Setup, Radio Standard, <select standard, then band>
Table 2-1. Values for Radio Band Parameter
Radio Standard Radio
Band
NONE NONE
GSM
or:
EDGE
NONE, PGSM, EGSM, RGSM, DCS1800, PCS1900, GSM450,
GSM480, GSM850, GSM700, TGSM810
WCDMA NONE, BANDI, BANDII, BANDIII, BANDIV, BANDV,
BANDVI, BANDVII, BANDVIII, BANDIX, BANDIX,
BANDX, BANDXI, BANDXII, BANDXIII, BANDXIV
cdma2000
or
1xEVDO
NONE, USCELL, USPCS, JAPAN, KOREAN, NMT, IMT2K,
UPPER, SECOND, PAMR400, PAMR800, IMTEXT,
PCS1DOT9G, AWS, US2DOT5G, PUBLIC, LOWER
LTE FDD NONE, BAND1, BAND2, BAND3, BAND4, BAND5,
BAND6, BAND7, BAND8, BAND10, BAND11, BAND12,
BAND13, BAND14, BAND17, BAND18, BAND19,
BAND20, BAND21, BAND24, BAND25, BAND26,
BAND27, BAND28, BAND31
LTE TDD BAND33, BAND34, BAND35, BAND36, BAND37,
BAND38, BAND39, BAND40, BAND41, BAND42,
BAND43, BAND44
TD-SCDMA BANDA, BANDB, BANDC, BANDD, BANDE, BANDF,