Manualshelf

Technical data

ManualsBrandsAgilent Technologies ManualsComputer AccessoriesE6640A EXM
221222223224225226227228229230
Chapter 15 229
cdma2000 Programming Commands
Spectrum Emissions Mask (SEM)
cdma2000 Programming Commands
Spectrum Emissions Mask (SEM)
This section provides the remote control SCPI commands for the cdma2000 Spectrum Emission Mask
(SEM) measurement from within the List Sequencer. This measurement is available only if you have the
cdma2000 measurement application licensed on the test set.
For more detailed information about the cdma2000 SEM measurement, refer to the online help
associated with the cdma2000measurement application, which is also available in PDF format (“User’s
and Programmer’s Reference”) on the Agilent website, www.agilent.com/find/e6640a.
You can also refer to the measurement guide for the X-series cdma2000 measurement application, which
is available on the the Agilent website, www.agilent.com/find/mxa.
SEM measurement SCPI commands
There is a set of SCPI commands available to program the cdma2000 SEM measurement when it is used
in the cdma2000 mode. To set up the cdma2000 measurements from within the Sequence Analyzer mode
you need to prefix the SCPI commands with LSEQuencer:C2K. For example, the [:SENSe]:SEMask
part of the SEM SCPI commands are replaced with: [:SENSe]:LSEQuencer:C2K:SEMask
The following commands are used to set up the SEM measurement.
[:SENSe]:LSEQuencer:C2K:SEMask:TYPE
[:SENSe]:LSEQuencer:C2K:SEMask:BANDwidth[1]|2:INTegration
[:SENSe]:LSEQuencer:C2K:SEMask:FREQuency[1]|2:SPAN
[:SENSe]:LSEQuencer:C2K:SEMask:BANDwidth[1]|2:[:RESolution]
[:SENSe]:LSEQuencer:C2K:SEMask:BANDwidth[1]|2:[:RESolution]:AUTO
[:SENSe]:LSEQuencer:C2K:SEMask:CARRier[:POWer]
[:SENSe]:LSEQuencer:C2K:SEMask:CARRier:AUTO[:STATe]
[:SENSe]:LSEQuencer:C2K:SEMask:CARRier:CPSD
[:SENSe]:LSEQuencer:C2K:SEMask:CARRier:PEAK[:POWer]
[:SENSe]:LSEQuencer:C2K:SEMask:OFFSet[1]|2:LIST:FREQuency:STARt
[:SENSe]:LSEQuencer:C2K:SEMask:OFFSet[1]|2:LIST:STATe
[:SENSe]:LSEQuencer:C2K:SEMask:OFFSet[1]|2:LIST:FREQuency:STOP
[:SENSe]:LSEQuencer:C2K:SEMask:OFFSet[1]|2:LIST:SIDE
[:SENSe]:LSEQuencer:C2K:SEMask:OFFSet[1]|2:LIST:BANDwidth[:RESolution]
[:SENSe]:LSEQuencer:C2K:SEMask:OFFSet[1]|2:LIST:BANDwidth[:RESolution]:AUTO
[:SENSe]:LSEQuencer:C2K:SEMask:OFFSet[1]|2:LIST:BANDwidth:IMULti
[:SENSe]:LSEQuencer:C2K:SEMask:OFFSet[1]|2:LIST:STARt:ABSolute
[:SENSe]:LSEQuencer:C2K:SEMask:OFFSet[1]|2:LIST:STOP:ABSolute