Technical data
226 Chapter 15
cdma2000 Programming Commands
Adjacent Channel Power (ACP)
cdma2000 Programming Commands
Adjacent Channel Power (ACP)
This section provides the remote control SCPI commands for the cdma2000 Adjacent Channel Power
(ACP) measurement from within the List Sequencer. This measurement is available only if you have the
cdma2000 measurement application licensed on the test set.
For more detailed information about the cdma2000 Adjacent Channel Power (ACP) measurement, refer
to the online help associated with the cdma2000 measurement application, which is also available in
PDF format (“User’s and Programmer’s Reference”) on the Agilent website,
www.agilent.com/find/e6640a.
You can also refer to the measurement guide for the X-series cdma2000 measurement application, which
is available on the Agilent website, www.agilent.com/find/mxa.
ACP measurement SCPI commands
There is a set of SCPI commands available to program the cdma2000 ACP measurement when it is used
in the cdma2000 mode. To set up the cdma2000 measurements from within the Sequence Analyzer mode
you need to prefix the SCPI commands with LSEQuencer:C2K. For example, the [:SENSe]:ACPower
part of the ACP SCPI commands are replaced with: [:SENSe]:LSEQuencer:C2K:ACPower
The following commands are used to set up the ACP measurement.
[:SENSe]:LSEQuencer:C2K:ACPower:BANDwidth[:RESolution]
[:SENSe]:LSEQuencer:C2K:ACPower:BANDwidth:SHAPe
[:SENSe]:LSEQuencer:C2K:ACPower:BANDwidth:TYPE
[:SENSe]:LSEQuencer:C2K:ACPower:CARRier[1]|2:COUNt
[:SENSe]:LSEQuencer:C2K:ACPower:CARRier[1]|2:REFerence
[:SENSe]:LSEQuencer:C2K:ACPower:CARRier[1]|2:RCARrier:AUTO
[:SENSe]:LSEQuencer:C2K:ACPower:CARRier[1]|2:RCFrequency
[:SENSe]:LSEQuencer:C2K:ACPower:CARRier[1]|2:RCFrequency:AUTO
[:SENSe]:LSEQuencer:C2K:ACPower:CARRier[1]|2[:POWer]
[:SENSe]:LSEQuencer:C2K:ACPower:CARRier[1]|2:AUTO[:STATe]
[:SENSe]:LSEQuencer:C2K:ACPower:CARRier[1]|2:CPSD
[:SENSe]:LSEQuencer:C2K:ACPower:CARRier[1]|2:LIST:COUPle
[:SENSe]:LSEQuencer:C2K:ACPower:CARRier[1]|2:LIST:PPResent
[:SENSe]:LSEQuencer:C2K:ACPower:CARRier[1]|2:LIST:WIDTh
[:SENSe]:LSEQuencer:C2K:ACPower:CARRier[1]|2:LIST:BANDwidth[:INTegration]
[:SENSe]:LSEQuencer:C2K:ACPower:CARRier[1]|2:LIST:METHod
[:SENSe]:LSEQuencer:C2K:ACPower:CARRier[1]|2:LIST:FILTer:ALPHa