Technical data

Chapter 14 223
W-CDMA Programming Commands
Loopback BER
W-CDMA Programming Commands
[:SENSe]:LSEQuencer:WCDMa:CDPower:FILTer[:RRC][:STATe]
[:SENSe]:LSEQuencer:WCDMa:CDPower:FILTer:ALPHa
[:SENSe]:LSEQuencer:WCDMa:CDPower:CRATe
[:SENSe]:LSEQuencer:WCDMa:CDPower:MCEStimator
[:SENSe]:LSEQuencer:WCDMa:CDPower:MCEStimator:TIMing
[:SENSe]:LSEQuencer:WCDMa:CDPower:FERRor:TRANge
[:SENSe]:LSEQuencer:WCDMa:CDPower:SEVM:FCOMpen
[:SENSe]:LSEQuencer:WCDMa:CDPower:SEVM:PCOMpen
[:SENSe]:LSEQuencer:WCDMa:CDPower:SSUPpress[:STATe]
Loopback BER results
Index Result Parameter
0 Loopback bit error ratio.
1 Total tested bit number.
2 Failed bit number.
3 Reserve.