Technical data

Chapter 14 217
W-CDMA Programming Commands
Code Domain Power (CDP)
W-CDMA Programming Commands
Code Domain Power (CDP)
This section provides the remote control SCPI commands for the W-CDMA Code Domain Power (CDP)
measurement from within the List Sequencer. This measurement is available only if you have the
W-CDMA measurement application licensed on the test set.
For more detailed information about the CDP measurement, refer to the online help associated with the
W-CDMA measurement application, which is also available in PDF format (“User’s and Programmer’s
Reference”) on the Agilent website, www.agilent.com/find/e6640a.
You can also refer to the measurement guide for the X-series W-CDMA measurement application, which
is available on the Agilent website, www.agilent.com/find/mxa.
CDP measurement SCPI commands
There is a set of SCPI commands available to program the W-CDMA CDP measurement when it is used
in the W-CDMA mode. To set up the W-CDMA measurements from within the Sequence Analyzer
mode you need to prefix the SCPI commands with LSEQuencer:WCDMa. For example, the
[:SENSe]:CDPower part of the CDP SCPI commands are replaced with:
[:SENSe]:LSEQuencer:WCDMa:CDPower
The following commands are used to set up the CDP measurement.
:CALCulate:LSEQuencer:WCDMa:CDPower:TYPE
:CALCulate:LSEQuencer:WCDMa:CDPower:SRATe
:CALCulate:LSEQuencer:WCDMa:CDPower:SPRead
:CALCulate:LSEQuencer:WCDMa:CDPower:AXIS[:MS]
[:SENSe]:LSEQuencer:WCDMa:CDPower:SYNC:MS
[:SENSe]:LSEQuencer:WCDMa:CDPower:SFORmat:MS
[:SENSe]:LSEQuencer:WCDMa:CDPower:PRACh:SIGNature
[:SENSe]:LSEQuencer:WCDMa:CDPower:SYNC:SCRamble:MS
[:SENSe]:LSEQuencer:WCDMa:CDPower:DPCH:MS:CONFigure
[:SENSe]:LSEQuencer:WCDMa:CDPower:SBOundary:MS
[:SENSe]:LSEQuencer:WCDMa:CDPower:SBOundary:LIST:MS:INIT
[:SENSe]:LSEQuencer:WCDMa:CDPower:SBOundary:LIST:MS:APPend
[:SENSe]:LSEQuencer:WCDMa:CDPower:SBOundary:LIST:MS:REPLace
[:SENSe]:LSEQuencer:WCDMa:CDPower:SBOundary:LIST:MS:CHANnel?
[:SENSe]:LSEQuencer:WCDMa:CDPower:SBOundary:LIST:MS:NCHANnels?
:CALCulate:LSEQuencer:WCDMa:CDPower:THSDpcch
:CALCulate:LSEQuencer:WCDMa:CDPower:DTXBurst