Technical data

202 Chapter 14
W-CDMA Programming Commands
Adjacent Channel Power (ACP)
W-CDMA Programming Commands
Adjacent Channel Power (ACP)
This section provides the remote control SCPI commands for the W-CDMA Adjacent Channel Power
(ACP) measurement from within the List Sequencer. This measurement is available only if you have the
W-CDMA measurement application licensed on the test set.
For more detailed information about the ACP measurement, refer to the online help associated with the
W-CDMA measurement application, which is also available in pdf format (User’s and Programmer’s
Reference) on the web and also available in pdf format on the Agilent website,
www.agilent.com/find/e6640a.
You can also refer to the measurement guide for the X-series W-CDMA measurement application, which
is available on the Agilent website, www.agilent.com/find/mxa.
Adjacent Channel Power (ACP) measurement SCPI commands
There is a set of SCPI commands available to program the W-CDMA ACP measurement when it is used
in the W-CDMA mode. To set up the W-CDMA measurements from within the Sequence Analyzer
mode you need to prefix the SCPI commands with LSEQuencer:WCDMa. For example, the
[:SENSe]:ACPower part of the ACP SCPI commands are replaced with
[:SENSe]:LSEQuencer:WCDMa:ACPower.
The following commands are used to set up the ACP measurement.
[:SENSe]:LSEQuencer:WCDMa:ACPower:BANDwidth[:RESolution]
[:SENSe]:LSEQuencer:WCDMa:ACPower:BANDwidth:SHAPe
[:SENSe]:LSEQuencer:WCDMa:ACPower:BANDwidth:TYPE
[:SENSe]:LSEQuencer:WCDMa:ACPower:CARRier[1]|2:COUNt
[:SENSe]:LSEQuencer:WCDMa:ACPower:CARRier[1]|2:REFerence
[:SENSe]:LSEQuencer:WCDMa:ACPower:CARRier[1]|2:RCARrier:AUTO
[:SENSe]:LSEQuencer:WCDMa:ACPower:CARRier[1]|2:RCFrequency
[:SENSe]:LSEQuencer:WCDMa:ACPower:CARRier[1]|2:RCFrequency:AUTO
[:SENSe]:LSEQuencer:WCDMa:ACPower:CARRier[1]|2[:POWer]
[:SENSe]:LSEQuencer:WCDMa:ACPower:CARRier[1]|2:AUTO[:STATe]
[:SENSe]:LSEQuencer:WCDMa:ACPower:CARRier[1]|2:CPSD
[:SENSe]:LSEQuencer:WCDMa:ACPower:CARRier[1]|2:LIST:COUPle
[:SENSe]:LSEQuencer:WCDMa:ACPower:CARRier[1]|2:LIST:PPResent
[:SENSe]:LSEQuencer:WCDMa:ACPower:CARRier[1]|2:LIST:WIDTh
[:SENSe]:LSEQuencer:WCDMa:ACPower:CARRier[1]|2:LIST:BANDwidth
[:INTegration]
[:SENSe]:LSEQuencer:WCDMa:ACPower:CARRier[1]|2:LIST:METHod