Technical data

Chapter 13 191
GSM/EDGE Programming Commands
EDGE Error Vector Magnitude (EVM)
GSM/EDGE Programming Commands
EDGE Error Vector Magnitude (EVM)
This section provides the remote control SCPI commands for the EDGE Error Vector Magnitude (EVM)
measurement from within the List Sequencer. This measurement is available only if you have the
GSM/EDGE measurement application licensed on the test set.
For more detailed information about the EDGE EVM measurement, refer to the online help associated
with the GSM/EDGE measurement application, which is also available in PDF format (“User’s and
Programmer’s Reference”) on the Agilent website, www.agilent.com/find/e6640a.
You can also refer to the measurement guide for the X-series GSM/EDGE measurement application,
which is available on the Agilent website, www.agilent.com/find/mxa.
EDGE EVM measurement SCPI commands
There is a set of SCPI commands available to program the EDGE EVM measurement when it is used in
the GSM/EDGE mode. To set up the GSM measurements from within the Sequence Analyzer mode you
need to prefix the SCPI commands with LSEQuencer:EDGE. For example, the [:SENSe]:EEVM part
of the EVM SCPI commands are replaced with [:SENSe]:LSEQuencer:EDGE:EEVM.
The following commands are used to set up the EVM measurement.
[:SENSe]:LSEQuencer:EDGE:EEVM:BSYNc:SOURce
:CALCulate:LSEQuencer:EDGE:EEVM:LIMit:TEST[:STATe} OFF|ON|0|1
:CALCulate:LSEQuencer:EDGE:EEVM:LIMit:TYPE
:CALCulate:LSEQuencer:EDGE:EEVM:LIMit:BTS:NORMal:REVM
:CALCulate:LSEQuencer:EDGE:EEVM:LIMit:BTS:EXTReme:REVM
:CALCulate:LSEQuencer:EDGE:EEVM:LIMit:MS:NORMal:REVM
:CALCulate:LSEQuencer:EDGE:EEVM:LIMit:MS:EXTeme:REVM
:CALCulate:LSEQuencer:EDGE:EEVM:LIMit:BTS:NORMal:REVM:NSRate
:CALCulate:LSEQuencer:EDGE:EEVM:LIMit:BTS:EXTReme:REVM:NSRate
:CALCulate:LSEQuencer:EDGE:EEVM:LIMit:MS:NORMal:REVM:NSRate
:CALCulate:LSEQuencer:EDGE:EEVM:LIMit:MS:EXTReme:REVM:NSRate
:CALCulate:LSEQuencer:EDGE:EEVM:LIMit:BTS:NORMal:REVM:HSRate
:CALCulate:LSEQuencer:EDGE:EEVM:LIMit:BTS:EXTReme:REVM:HSRate
:CALCulate:LSEQuencer:EDGE:EEVM:LIMit:MS:NORMal:REVM:HSRate
:CALCulate:LSEQuencer:EDGE:EEVM:LIMit:MS:EXTReme:REVM:HSRate
:CALCulate:LSEQuencer:EDGE:EEVM:LIMit:BTS:NORMal:PEVM
:CALCulate:LSEQuencer:EDGE:EEVM:LIMit:BTS:EXTReme:PEVM
:CALCulate:LSEQuencer:EDGE:EEVM:LIMit:MS:NORMal:PEVM