Technical data

180 Chapter 12
Basic Measurements Programming Commands
Basic IQ Data
Basic Measurements Programming
Commands
Basic IQ Data Results
The parameters and default setting for this command are detailed in the following table. The first SCPI
parameter is Index 0.
Index Result Parameter
0 Number of IQ Pairs or Amplitude/Phase Pairs.
1 Info Bandwidth used to capture IQ Pairs.
2 Sample Interval used to capture IQ Pairs.
3 Sample Frequency used to capture IQ Pairs.
4 Peak power of the measurement interval. NAN will be returned if the
measurement type is set to IQ samples pairs.
5 Average power of the measurement interval. NAN will be returned if the
measurement type is set to IQ samples pairs.