Technical data

Chapter 11 149
Example Test Scenarios
Calibration Example
Example Test Scenarios
Calibration Example
In this example, the built-in test functions of the DUT are used to implement an FTD (fast device tune)
calibration sequence for mobile phone in cdma2000 mode.
The hardware setup is illustrated below. The PC controller communicates with the DUT and with the
EXM test set by way of USB cables. RF signals are exchanged bi-directionally between the DUT’s C2K
antenna port and the test set’s RFIO 1 port.
Figure 11-1. Hardware Setup for Calibration Example