Technical data

11 4 Chapter 9
Sequence Setup Commands
Programming Analyzer Sequences (Parameter-Specific Commands)
Sequence Setup Commands
To set a CDMA 2000 Radio Band:
To set a 1xEVDO Radio Band:
SCPI Command (for specifying
a CDMA 2000 radio band)
To set the radio band as an individual value:
[:SENSe]:LSEQuencer:ACQuire{1:512}:SETup:RADio:BAND
NONE|USCELL|USPCS|JAPAN|KOREAN|NMT|IMT2K|UPPER|SECOND|
PAMR400|PAMR800|IMTEXT|PCS1DOT9G|AWS|US2DOT5G|PUBLIC|
LOWER
[:SENSe]:LSEQuencer:ACQuire{1:512}:SETup:RADio:BAND?
To set the radio band as an array:
[:SENSe]:LSEQuencer:LIST:SETup:RADio:BAND
<enum>,<enum>,<enum>,…
[:SENSe]:LSEQuencer:LIST:SETup:RADio:BAND?
The array form of the command is used to make a different setting for each
acquisition in the sequence (the number of array values must match the
number of acquisitions; otherwise a "settings conflict" error will occur).
SCPI Examples (for specifying a
CDMA 2000 radio band)
:LSEQ:ACQ2:SET:RAD:BAND NONE
:LSEQ:ACQ2:SET:RAD:BAND?
:LSEQ:LIST:SET:RAD:BAND NMT,NONE,KOREAN,IMTEXT
:LSEQ:LIST:SET:RAD:BAND?
SCPI Command (for specifying
a 1xEVDO radio band)
To set the radio band as an individual value:
[:SENSe]:LSEQuencer:ACQuire{1:512}:SETup:RADio:BAND
NONE|USCELL|USPCS|JAPAN|KOREAN|NMT|IMT2K|UPPER|SECOND|
PAMR400|PAMR800|IMTEXT|PCS1DOT9G|AWS|US2DOT5G|PUBLIC|
LOWER
[:SENSe]:LSEQuencer:ACQuire{1:512}:SETup:RADio:BAND?
To set the radio band as an array:
[:SENSe]:LSEQuencer:LIST:SETup:RADio:BAND
<enum>,<enum>,<enum>,…
[:SENSe]:LSEQuencer:LIST:SETup:RADio:BAND?
The array form of the command is used to make a different setting for each
acquisition in the sequence (the number of array values must match the
number of acquisitions; otherwise a "settings conflict" error will occur).
SCPI Examples (for specifying a
1xEVDO radio band)
:LSEQ:ACQ2:SET:RAD:BAND NONE
:LSEQ:ACQ2:SET:RAD:BAND?
:LSEQ:LIST:SET:RAD:BAND NMT,NONE,KOREAN,IMTEXT
:LSEQ:LIST:SET:RAD:BAND?