Technical data

29
User and Remote Interface Security Measures
USB Interfaces
b. For Windows 7, click the Windows Start button, then select Shut down > Log off from the Windows
Start menu, as shown in Figure 7-5 below.
Figure 7-5 Windows 7 Log off Control
3. After you have logged on to the instrument as the Administrator, restart the Agilent XSA application.
4. When the XSA application has fully initialized (that is, when the main results view and softkey menu are
visible), press the System front-panel key.
5. From the System softkey menu, select: More > Security > USB.
6. Select the option Read Only.
7. To activate the configuration change, either log out and then back in under your usual user name (which
by default is "instrument"), or cycle the instrument power.