Technical data

21
Memory Clearing, Sanitization and/or Removal Procedures
Instrument Sanitization Procedures
Figure 6-1 Removing the hard drive
1. Turn the PXIe chassis power off.
2. Remove the controller from the PXIe chassis.
3. Position the controller, top side up, on the workbench. Loosen the thumb screws.
4. Unseat the removable hard drive from the connector and remove it from the slot.
5. Store the hard drive in the original antistatic packaging when not in use to avoid damage.
Application License Key Storage
License keys for measurement applications are stored on the removable hard drive; if you need to replace the
SSD, contact Agilent Customer Support for help with restoring these licenses.