Technical data

12 Getting Started Guide
1 Quick-Start
Instrument Selection
On the monitor or remote desktop view of the test set, each of the two instruments is
represented by a separate XSA window. You can identify which TRX a window controls
by looking for the identifier (“Left” or “Right”) at the top left corner of the window.
Although the test set as a whole is assigned only one IP address for the entire PXIe
chassis, the individual instruments within the chassis can be differentiated in network
communication with the test set. For information on how to send commands to the test
set, using a VISA connection, see the Agilent E6630A Programmer’s Guide, which is
available online at:
http://www.agilent.com/find/E6630A_manuals
NOTE If the E6630A includes both of the possible sub-instruments, they are controlled using
separate VISA connections. By default, the left and right sub-instruments are
distinguished by the socket numbers 5025 and 5125, respectively.
Left sub-instrument:
TCPIP0::<hostname>::5025::SOCKET
Right sub-instrument:
TCPIP0::<hostname>::5125::SOCKET