Keysight Technologies

dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. 07121 / 51 50 50 ▪ Fax 07121 / 51 50 10 ▪ [e-mail] ▪ www.datatec.de
14
Controller status
Power Green LED indicating power supply is good
Hard drive Yellow LED indicating disc drive activity
User Red LED reserved for future use
Controller trigger
Connector BNC female
Trigger Programmable direction
LAN TCP/IP interface
Standard x 2 1000 Base-T
Connector x 2 RJ45 Ethertwist
Monitor output
Connector DisplayPort, compatible with DisplayPort to VGA adapter
USB 3.0 ports
Master (2 ports)
Standard Compatible with USB 3.0/2.0
Connector USB Type-A female
Output current 0.5 A nominal
USB 2.0 ports
Master (4 ports)
Standard Compatible with USB 2.0
Connector USB Type-A female
Output current 0.5 A nominal
10 MHz Out
Connector Type-BNC female, 50 Ω nominal
Output amplitude 9.5 dBm nominal
Ref In
Connector Type-BNC female, 50 Ω nominal
Characteristics (see Timebase Specications)
RF connections per installed TRX module
RF3 I|O and RF4 I|O ports (half duplex) N-Type female, 50 Ω nominal
RFIO1 and RFIO2 ports (full duplex) N-Type female, 50 Ω nominal
Trigger In 1, Trigger In 2, connections per installed TRX module
Connector BNC female
Impedance > 10 kΩ nominal
Trigger level range –5 to +5 V
Trigger Out 1, Trigger Out 2, connections per installed TRX module
Connector BNC female
Impedance 50 Ω nominal
Trigger level range 3.3 V LVTTL
Indicators
TRX status LED indicator
Front panel
14 | Keysight | E6640A EXM Wireless Test Set - Data Sheet