Keysight Technologies

dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. 07121 / 51 50 50 ▪ Fax 07121 / 51 50 10 ▪ [e-mail] ▪ www.datatec.de
13
Environmental characteristics (continued)
Environmental stress Samples of this product have been type tested in accordance with the Keysight Environmental
Test Manual and veried to be robust against the environmental stresses of storage, trans-
portation, and end-use; those stresses include, but are not limited to, temperature, humidity,
shock, vibration, altitude, and power line conditions; test methods are aligned with IEC 60068-2
and levels are similar to MILPRF-28800F Class 3
Safety – Complies with European Low Voltage Directive 2006/95/EC
– IEC/EN 61010-1
– Canada: CSA C22.2 No. 61010-1-04
– USA: UL Std. 61010-1
Audio noise
Acoustic noise emission Geraeuschemission
LpA < 70 dB LpA < 70 dB
Operator position Am Arbeitsplatz
Normal position Normaler Betrieb
Per ISO 7779 Nach DIN 45635 t.19
Calibration cycle
The recommended calibration cycle is two years; calibration services available through Keysight service centers
Maximum applied reverse power
RF3 I|O and RF4 I|O ports +30 dBm, CW
RFIO1 and RFIO2 ports +36 dBm, CW
RF I/O port isolation
Single TRX, port (as input) to port (as output)
< 2700 MHz > 90 dB nominal
3400 to 3800 MHz > 85 dB nominal
> 4900 MHz > 80 dB nominal
Warranty
Standard 3-year warranty
Controller characteristics
CPU Intel i7-3610QE quad-core
CPU clock frequency 2.3 GHz, 3.3 GHz (single-core Turbo Boost)
Memory
L3 cache 6 MB
RAM type DDR3, PC3- 12800 204-pin SODIMM sockets
RAM capacity 12 GB
Operating system Microsoft Windows 7 Professional, 64- bit
Data storage
Type 2.5 inch SATA II
Size 256 GB
Remote programming
Interface LAN RJ45
General specications (continued)
13 | Keysight | E6640A EXM Wireless Test Set - Data Sheet