Ihr Spezialist für Mess- und Prüfgeräte Keysight E6640A EXM Wireless Test Set Data Sheet Solve today, evolve tomorrow dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. 07121 / 51 50 50 ▪ Fax 07121 / 51 50 10 ▪ info@datatec.de ▪ www.datatec.
Introduction Keysight EXM Benefits – Optimize multi-device testing with up to four TRX channels per EXM: each is a complete vector signal analyzer/vector signal generator (VSA/VSG) instrument – Easily test multi-format devices with standard-specific X-Series measurement applications – Maximize throughput with raw hardware speed and advanced sequencing – Increase first-pass yield with superior signal purity and measurement accuracy – Get up and running in hours, not days, with validated turnkey chipset solut
03 | Keysight | E6640A EXM Wireless Test Set - Data Sheet Keysight Technologies provides the speed, performance, and results you can trust…across the wireless device lifecycle Development DVT & Conformance T4000S-Series UXM (E7515A) LTE/LTE-A LTE/LTE-A Design verification & conformance (RF/RRM/PCT) BITE Ready for 4G and beyond Bluetooth RIDER RFID/NFC Manufacturing EXM (E6640A) 2G/3G/LTE/LTE-A/BT/WLAN Ultimate scalability & port density EXT (E6607B/C) with MPA PXT (E6621A) 2G/3G/LTE LTE
04 | Keysight | E6640A EXM Wireless Test Set - Data Sheet Table of Contents Product Features ...................................................................................................... 5 E6640A EXM Applications........................................................................................ 6 Cellular.............................................................................................................................................. 6 Wireless connectivity ........................
05 | Keysight | E6640A EXM Wireless Test Set - Data Sheet Product Features X-Series user interface1 TRX1 measurement TRX2 measurement TRX3 measurement TRX4 measurement E6640A EXM Two Twofull fullduplex duplex 2 2 I/O I/Oports ports Display Displayport port Twohalf halfduplex duplex Two 2 2 I/Oports ports I/O LAN LAN (1000 (1000 base baseT) T) USB USB 3.0 3.0 EachTRX TRXhas hasa a Each fullyintegrated integrated fully VSA/VSG VSA/VSG USB USB 2.0 2.
06 | Keysight | E6640A EXM Wireless Test Set - Data Sheet E6640A EXM Applications Cellular – – – – – – LTE/LTE-Advanced FDD LTE/LTE-Advanced TDD HSPA+, W-CDMA 1xEV-DO, cdma2000 GSM/EDGE/EDGE Evo TD-SCDMA Wireless connectivity – – – – – 802.11a/b/g/n/ac WiMAX Bluetooth® 1.0 to 4.
07 | Keysight | E6640A EXM Wireless Test Set - Data Sheet Product Specifications Definitions and conditions Specification Specifications describe the performance parameters covered by the product warranty and are valid from 20 to 35 °C unless otherwise noted. Typical Typical describes additional product performance information that is not covered by the product warranty. It is performance beyond specifications that 95 percent of the units exhibit with a 95 percent confidence level.
08 | Keysight | E6640A EXM Wireless Test Set - Data Sheet Vector signal analyzer performance Performance Capture depth 4 GB memory, 512 MSa of IQ data Frequency and time specifications Frequency range All RF ports (options are per TRX module) Option E6640A-504 Option E6640A-5WC Option E6640A-506 380 MHz to 3.8 GHz 1.1 to 1.8 GHz, 2.3 to 2.6 GHz, and 4.8 to 6.0 GHz 380 MHz to 6.
09 | Keysight | E6640A EXM Wireless Test Set - Data Sheet Vector signal analyzer performance (continued) Amplitude accuracy and range specifications (continued) CW absolute amplitude accuracy RF3 I|O and RF4 I|O ports (configured to input mode in specified frequencies) Frequency range Input level ≤ –8 to –70 dBm 380 to 495 MHz < ±0.60 dB, < ±0.30 dB typical 695 to 730 MHz < ±0.60 dB, < ±0.25 dB typical > 730 to 920 MHz < ±0.50 dB, < ±0.15 dB typical 1425 to 1485 MHz < ±0.65 dB, < ±0.
| Keysight | E6640A EXM Wireless Test Set - Data Sheet Vector signal generator performance Performance Arb bandwidth Arb sample memory (storage capacity) Up to 160 MHz 4 GB memory, 512 MSa of IQ data Frequency specifications Frequency range All RF ports (options are per TRX module) Option E6640A-504 Option E6640A-5WC Option E6640A-506 380 MHz to 3.8 GHz 1.1 to 1.8 GHz, 2.3 to 2.6 GHz, and 4.8 to 6 GHz 380 MHz to 6.
| Keysight | E6640A EXM Wireless Test Set - Data Sheet Vector signal generator performance (continued) Amplitude accuracy and range specifications (continued) Absolute level accuracy (specified frequencies, CW) continued 3400 to 3800 MHz Level ≤ –15 to –80 dBm < ±0.60 dB, < ±0.30 dB typical Level ≤ –80 to –110 dBm < ±1.10 dB, < ±0.55 dB typical 4900 to 6000 MHz Level ≤ –20 to –80 dBm < ±0.75 dB, < ±0.30 dB typical Level ≤ –80 to –100 dBm < ±1.00 dB, < ±0.50 dB typical Setting resolution 0.
| Keysight | E6640A EXM Wireless Test Set - Data Sheet Timebase specifications Internal timebase Accuracy Frequency stability – aging rate Daily Yearly Total 10 years Achievable initial calibration accuracy Frequency stability – temperature effects 20 to 30 °C Full temperature range Frequency stability – warm up 5 minutes over +20 to +30 °C, 1 hour 15 minutes over +20 to +30 °C, 1 hour Recommended calibration cycle ± [(time since last adjustment x aging rate) + temperature stability + calibration accur
| Keysight | E6640A EXM Wireless Test Set - Data Sheet General specifications (continued) Environmental characteristics (continued) Environmental stress Samples of this product have been type tested in accordance with the Keysight Environmental Test Manual and verified to be robust against the environmental stresses of storage, transportation, and end-use; those stresses include, but are not limited to, temperature, humidity, shock, vibration, altitude, and power line conditions; test methods are aligne
| Keysight | E6640A EXM Wireless Test Set - Data Sheet Front panel Controller status Power Hard drive User Green LED indicating power supply is good Yellow LED indicating disc drive activity Red LED reserved for future use Controller trigger Connector Trigger BNC female Programmable direction LAN TCP/IP interface Standard x 2 Connector x 2 1000 Base-T RJ45 Ethertwist Monitor output Connector DisplayPort, compatible with DisplayPort to VGA adapter USB 3.
| Keysight | E6640A EXM Wireless Test Set - Data Sheet Application Specifications V9071B GSM/EDGE/Evo measurement application key specifications1 Power versus time (PvT) Absolute power accuracy ±0.36 dB typical at 0 dBm input power Phase error (GMSK modulation) Average floor 0.30 º typical at 0 dBm input power Peak floor 0.85 º typical at 0 dBm input power EDGE error vector magnitude (EVM) RMS floor 0.65% typical at 0 dBm input power Peak floor 2.
| Keysight | E6640A EXM Wireless Test Set - Data Sheet Application Specifications (continued) V9073B W-CDMA/HSPA+ measurement application key specifications1 Channel power Absolute power accuracy ±0.36 dB typical at 0 dBm input power QPSK EVM Residual EVM 0.85% typical at –10 dBm input power Adjacent channel leakage ratio (ACLR) and adjacent channel power ratio (ACPR) Residual relative power in 3.
| Keysight | E6640A EXM Wireless Test Set - Data Sheet Application Specifications (continued) V9072B cdma2000® and V9076B 1xEV-DO measurement application key specifications1 Channel power Absolute power accuracy ±0.36 dB typical at 0 dBm input power Error vector magnitude (EVM) Residual EVM 0.85% typical at –10 dBm input power Adjacent channel power (ACP) Residual relative power in 30 kHz bandwidth (offsets) 885 kHz –71 dBc typical at 0 dBm input power 1.98 MHz 4.
| Keysight | E6640A EXM Wireless Test Set - Data Sheet Application Specifications (continued) V9080B LTE/LTE-Advanced FDD and V9082B LTE/LTE-Advanced TDD measurement application key specifications1 Transmit power Absolute power accuracy ±0.36 dB typical at 0 dBm input power Error vector magnitude (EVM) Residual EVM 5, 10, 15, 20 MHz bandwidth 0.
| Keysight | E6640A EXM Wireless Test Set - Data Sheet Application Specifications (continued) V9081B Bluetooth® measurement application key specifications1 Channel power Absolute power accuracy ±0.26 dB typical at 0 dBm input power Modulation characteristics Deviation range ±250 kHz nominal EDR modulation accuracy Range (rms DEVM) 0 to 12% nominal Floor 0.
| Keysight | E6640A EXM Wireless Test Set - Data Sheet Application Specifications (continued) V9079B TD-SCDMA measurement application key specifications1 Channel power Absolute power accuracy ±0.36 dB typical at 0 dBm input power Error vector magnitude (EVM) Residual EVM , 1.6 MHz channel bandwidth 0.75% typical at 0 dBm input power Adjacent channel leakage ratio (ACLR) and adjacent channel power ratio (ACPR) Residual relative power in 1.28 MHz bandwidth (offsets) 1.
| Keysight | E6640A EXM Wireless Test Set - Data Sheet Application Specifications (continued) V9077B WLAN measurement application key specifications1 Modulated power Absolute power accuracy 2400 to 2483.5 MHz ±0.27 dB typical at 0 dBm input power 5150 to 5185 MHz ±0.49 dB typical at 0 dBm input power Error vector magnitude (EVM) EVM floor conditions Phase Tracking on, pre-amble only, RF I|O ports 802.11b: 2.4 GHz ≤ –40.9 dB typical at –20 dBm input power 802.11g: 2.
| Keysight | E6640A EXM Wireless Test Set - Data Sheet 0 -10 -20 -30 -40 Relative limit Spectrum -50 -60 -70 Figure 10. 802.11a/g SEM nominal performance at 5.8 GHz with 20 MHz bandwidth 0 -10 -20 -30 -40 Relative limit Spectrum -50 -60 -70 Figure 11. 802.11n SEM nominal performance at 5.8 GHz with 40 MHz bandwidth 0 -10 -20 -30 Relative limit -40 Spectrum -50 -60 -70 Figure 12. 802.11ac SEM nominal performance at 5.8 GHz with 80 MHz bandwidth 22 dataTec ▪ Ferdinand-Lassalle-Str.
Ihr Spezialist für Mess- und Prüfgeräte 23 | Keysight | E6640A EXM Wireless Test Set - Data Sheet Wireless LAN source key specifications Error vector magnitude (EVM) Wireless LAN error vector magnitude (EVM performance (using Signal Studio signal noted)) RF I|O ports < –28 dB typical (0 to –30 dBm) 802.11g: 2.4 GHz < –50 dB typical (–5 to –15 dBm) 802.11a: 5.8 GHz < –44 dB typical (–5 to –15 dBm) 802.11n: 5.8 GHz at 20 MHz bandwidth < –43 dB typical (–5 to –15 dBm) 802.11n: 5.
Ihr Spezialist für Mess- und Prüfgeräte STARKE MARKEN. HÖCHSTE PRODUKTVIELFALT. BESTE QUALITÄT. Schnell und bequem online bestellen – bei dataTec ist das möglich. Bei uns finden Sie die perfekte Lösung für ihre vielfältigen Anforderungen. Wir bieten eine unschlagbare Auswahl an Mess- und Prüfgeräten namhafter Hersteller. Diese reicht von Arbiträr-Funktionsgeneratoren über Logikanalysatoren bis hin zu Stromversorgungen und Stromzangen oder Oszilloskopen bis 90 GHz Bandbreite.
