User`s guide

Use Your System 4
Agilent E6474A User’s Guide 99
• When the phone is connected to the Phone 1 port, the Aux
port cannot be used.
• When the phone is connected to the Phone 2 port, the
Receiver port cannot be used.
• In order to measure data/trace parameters, two ports must
be used.
Generic Data Devices
Before using the Agilent E6474A software to make data
measurements, it is important that you configure the external
software and hardware. This software and hardware is used to
establish a data connection through your phone, with the phone
acting as a wireless modem. The following sections outline the
tasks you need to perform before you start the Agilent E6474A
software.
For more information, refer to:
• Phone supplier’s documentation or software
• Windows Dial Up Networking installation wizard help
• Agilent E6474A online help and tutorial
Configure the Phone
Each phone is supplied with manufacturer’s documentation
that explains how to configure a phone for use as a modem
(data device). Using this documentation set up the phone’s
modem settings by navigating through the phone menu options
and entering the modem interface settings.
Add a Modem Connection to the Computer
Instructions for adding a modem connection to the computer
and configuring it are included with the phone’s
documentation. Follow the instructions explicitly.